OVERTURE High Speed PETG review: retune the new formula instead of copying the old profile
At a glance
Explicit new-formula feedback favors easier flow; dimensional fit and adhesion can still change when speed rises.
The material & format
- High Speed PETG formulation
- Selected black 1 kg spool
- 1.75 mm diameter
Why consider it
- Easier flow is supported by explicitly matched formulation feedback.
- Good surface quality at a qualified pace.
What to weigh up
- Faster printing can reduce adhesion and surface quality.
- Old profiles can change dimensions and corners.
The most useful reason to try OVERTURE High Speed PETG is an easier-flowing material in an already capable workflow. It is not a promise that a 300 mm/s label makes every model faster without compromising adhesion or fit.
Replacing the older formula? Check these first
- Fit: print a mating feature from a known design.
- Corners: inspect pressure-advance behavior rather than retaining an old value automatically.
- Adhesion: repeat the intended footprint at the proposed pace.
- Surface: decide whether the extra speed still produces acceptable walls.
The new-formula account that reported easier melting also reported tighter-fitting parts. That is why simply loading the previous profile can miss the point of the change.
A faster formula still benefits from a sensible pace
A detailed High-Speed experience found clean prints after drying and tuning, yet poorer adhesion and finish at higher speed. The useful maximum is the pace that preserves the required result on your actual model.
Before changing nozzle size to chase speed, compare the detail and flow tradeoffs of 0.4 and 0.6 mm for the actual part.
Pros & Cons Analysis
Based on supplied customer reviews and verified product documentation
Pros
- The new-formula distinction has practical meaning. A black account describes less ooze than the older material, while an explicitly new-formula account found easier melting. These observations support recalibration, not an unbounded speed increase.
- The material can work well without pursuing the headline speed. A detailed High-Speed white account reports smooth output after preparation and tuning. Its success was clearest at more moderate settings.
Cons
- The label does not remove the tradeoff. The detailed white account found deterioration when pushing speed. Check the actual footprint and wall finish before assigning a production profile.
- A replacement formula needs its own calibration. An explicitly new-formula army-green account describes tighter mating parts and pressure-advance changes. Those are family-level observations, not measured black-spool dimensional error.
Retune for the result, not the label
Try the new High Speed formulation when flow is limiting a suitable PETG job. Recheck fit, corners and adhesion before replacing an established profile or running a larger batch.
Frequently Asked Questions
Can I keep the old OVERTURE PETG profile unchanged?
Check it first. Explicit new-formula feedback describes changed fit and pressure-advance behavior.
Does the listed speed establish structural performance?
No. The captured experiences are not controlled mechanical tests, and usable speed depends on the complete print setup.
Technical Specifications
| Product type | PETG filament |
|---|---|
| Reviewed formulation | OVERTURE High Speed PETG; black |
| Nominal filament diameter | 1.75 mm |
| Manufacturer diameter tolerance | Listing: ±0.02 mm |
| Package format | 1 kg spool |
| Nozzle guidance | Listing: 230–260°C nozzle, 65–70°C bed; qualify actual profile |
| Material care | Store dry; follow the current exact-material drying instructions |
| Variant / handling limit | Do not reuse older OVERTURE PETG settings without checking fit |
SUNLU PETG 2.0
eSUN PETG
eSUN PETG Basic
Bambu Lab PETG Basic