SUNLU PETG 2.0 review: satin black is the reason to try it before buying four rolls
At a glance
Matching black-pack feedback favors a less glossy PETG surface; qualify adhesion and feeding before committing to the 4 kg offer.
The material & format
- SUNLU PETG 2.0; black
- Selected package: Four 1 kg spools; 4 kg total selected offer
- Nominal diameter: 1.75 mm
Why consider it
- A less glossy black PETG surface.
- Clean printing in established PETG workflows.
What to weigh up
- Adhesion and intermittent sticking still appear.
- The selected four-pack increases the initial commitment.
PETG 2.0 is most interesting for its black satin-like surface. The directly matched four-pack accounts repeatedly describe a less glossy result, making appearance a stronger buying argument than unverified claims about a percentage strength improvement.
Use the first roll as an acceptance test
- Surface: inspect a visible wall under the intended lighting.
- Adhesion: repeat the real footprint, including corners that are prone to lift.
- Feeding: watch the initial longer run before relying on the remaining stock.
The current offer contains four one-kilogram rolls. That package size should influence the decision: a lower unit price does not help if the material or finish is wrong for the project.
Keep the three PETG names separate
Standard SUNLU PETG, PETG 2.0 and High-Speed Matte PETG are different listing identities. Generic brand praise and an account explicitly describing PLA were excluded from this review’s material-specific conclusions.
If changing from PLA, compare the PLA and PETG workflow requirements before committing to this four-spool package.
Pros & Cons Analysis
Based on supplied customer reviews and verified product documentation
Pros
- The finish is the strongest matched reason to try it. Black four-pack accounts describe matte or satin results rather than the usual oily-looking gloss. That can matter for exposed practical parts.
- The appearance can come with manageable printing. Matching accounts report smooth output after preparation or with familiar profiles. Those are setup-specific successes, not a no-stringing guarantee.
Cons
- Do not treat 2.0 as a fault-free label. Favorable black-pack feedback includes lifted prints, while another reports occasional sticking. The evidence does not identify one universal cause.
- Qualify before stocking up. Four kilograms makes sense only if the formulation and surface suit repeat jobs. Compare equal quantities and avoid assuming every SUNLU PETG listing is this version.
Buy the satin finish after a representative trial
PETG 2.0 is worth considering when a less glossy black part is the goal. Qualify the footprint and feed behavior before making the four-pack a repeat purchase.
Frequently Asked Questions
Is the selected offer one kilogram?
It is four one-kilogram spools, totaling four kilograms. Check the live package selection before ordering.
Is PETG 2.0 the same as High-Speed Matte PETG?
No. Keep those named formulations separate when comparing evidence and settings.
Technical Specifications
| Product type | PETG filament |
|---|---|
| Reviewed formulation | SUNLU PETG 2.0; black |
| Nominal filament diameter | 1.75 mm |
| Manufacturer diameter tolerance | Not verified for this exact formulation |
| Package format | Four 1 kg spools; 4 kg total selected offer |
| Nozzle guidance | Manufacturer: 230–240°C at 50–100 mm/s; 240–270°C at 100–200 mm/s. Captured listing bed range: 70–80°C; qualify the actual profile. |
| Material care | Store dry; follow the current exact-material drying instructions |
| Variant / handling limit | Not standard PETG or High-Speed Matte PETG; selected offer is a four-pack |
ELEGOO PETG-CF
Bambu Lab PETG Translucent
Fiberon PETG-rCF08
SUNLU Glow PETG