E3D Revo ObXidian 0.4 mm review: abrasive capability with mixed service experiences
At a glance
The standard-flow ObXidian brings a coated wear-resistant design to Revo, but matching feedback includes clogs, difficult removal and breakage.
The setup
- Standard-flow Revo ObXidian
- Selected 0.4 mm orifice
- Not the High Flow variant
Why consider it
- A coated abrasive-material option without leaving Revo.
- Some users find changing and cleaning more convenient.
What to weigh up
- Plastic buildup and clogging still appear.
- Removal and mechanical integrity drew serious complaints.
- The longer-life value is not quantified.
The standard-flow Revo ObXidian is a different buying decision from the High Flow version. Its case is wear-resistant capability in the Revo format, with convenience that the matching experiences describe unevenly.
Three promises to qualify
| Expectation | What the evidence allows |
|---|---|
| Easier changes | A positive cold-change account, but another needed tools to loosen it. |
| Less attached plastic | A favorable impression and a contrary PETG-CF buildup experience. |
| Long service life | No controlled lifetime measurement; breakage and clog reports remain relevant. |
Keep standard and High Flow separate
If your main problem is throughput, assess the high-flow product directly. This nozzle’s coating does not establish a flow upgrade, and an abrasive filament can still require an opening larger than 0.4 mm.
Pros & Cons Analysis
Based on supplied customer reviews and verified product documentation
Pros
- The product has a defined role. Its wear-resistant design suits a compatible system seeking an alternative to ordinary brass. The captured feedback does not establish a measured service lifetime.
- The benefit is present but not universal. A matching account likes cold changes, and another describes less attached filament. Contrary experiences mean those are possibilities rather than unconditional promises.
Cons
- The coating is not an anti-clog guarantee. Matching feedback includes repeated clogs and a detailed PETG-CF buildup complaint. Check the filament’s orifice requirement and approved maintenance route.
- Keep the service history in the decision. Accounts describe tool-assisted loosening and broken assemblies. Their causes are not established, so no defect rate or blame is assigned.
- Do not buy on a lifetime assumption. One account was disappointed by apparent wear and questioned authenticity, but neither issue was verified. Source the exact product and retain support details.
Choose cautiously for a specific material need
Consider the standard ObXidian when compatible Revo hardware and abrasive-material requirements justify it. Confirm orifice guidance and support options, and do not assume the coating removes maintenance or guarantees longer life.
Frequently Asked Questions
Is this the high-flow version?
No. The selected product is standard-flow Revo ObXidian.
Do coating-color changes prove a counterfeit nozzle?
No. A customer raised that concern, but the captured evidence does not verify authenticity from appearance.
Technical Specifications
| Product type | Wear-resistant nozzle assembly |
|---|---|
| Interface | E3D Revo |
| Selected orifice | 0.4 mm |
| Filament diameter | 1.75 mm |
| Material / coating | Copper and hardened-steel assembly with E3DLC coating. |
| Flow design | Standard flow |
| Package / components | Package quantity: One selected nozzle assembly |
| Temperature guidance | 300°C maximum for this original ObXidian nozzle; complete-system limits also apply. |
| Installation / limits | Confirm material minimum orifice and current cleaning guidance |
Slice Boron Nitride Paste
Micro Swiss FlowTech CHT CM2 0.4 mm
Micro Swiss FlowTech Brass 0.4 mm
Micro Swiss FlowTech CM2 0.6 mm