eSUN TPU 95A review: sort out feeding before judging the filament
At a glance
Capable of useful flexible prints, with the clearest tradeoff coming from extruder pressure and the route between spool and hot end.
The setup
- Selected black 1 kg standard TPU 95A.
- Manufacturer favors direct drive and slow printing.
- Current nozzle/bed guidance: 220–250°C / 45–60°C.
Why consider it
- Useful flexible parts once the feed system is suited to the material.
- A longer P1S print succeeded with deliberate preparation.
What to weigh up
- Tight extrusion pressure can shear the filament.
- External dry-box routing and feeder compatibility need checking.
For eSUN TPU 95A, the decisive compatibility question is whether your extruder can feed it without damaging it. A matched black-filament experience reports shearing in an Adventurer 5M, then successful phone-case printing on an Ender 3v2 with adjustable extruder pressure. The change of machine is more useful than a blanket “easy TPU” recommendation.
Which setup are you buying for?
A supported, adjustable TPU route
The phone-case result supports this use case. Establish consistent feeding before extending the job.
A tight feeder that chews the filament
Stop and consult the printer’s supported pressure and routing guidance. Another spool does not automatically remove a mechanical restriction.
An automated spool system
Confirm standard 95A TPU support first. A reel that physically fits is not evidence that the system supports the material.
What the long-print example actually shows
What was different in the 12-hour P1S job?
A gray-variant report completed a 12-hour P1S job after drying and modifying the route. That shows a managed setup can work, not that the supplied path on every printer is suitable. Another account needed effort feeding from an external dry box, so the whole route deserves attention, including drag before the extruder.
Keep the phone-case evidence separate from unsupported application claims. Successful flexible printing does not certify a bushing, seal or protective part for service.
Pros & Cons Analysis
Based on supplied customer reviews and verified product documentation
Pros
- The material can produce a practical flexible item. The black account describes a phone case holding up after switching to a more suitable feeding setup. This supports a similar low-risk trial, not a certified protective rating.
- Longer work is possible after preparation. The gray P1S result ran for 12 hours using drying and a specific route. Treat it as evidence of a workable configuration rather than a ready-made universal setup.
Cons
- The extruder can be the limiting factor. Shearing under a tight feeding system is the clearest problem in the black feedback. Follow the printer’s adjustment guidance rather than forcing filament through a route that repeatedly damages it.
- The whole path matters, not only the spool. External dry-box tuning and an AMS complaint show why feeder support must be checked before blaming spool construction alone. A reel adapter cannot establish material compatibility.
A useful 95A option for a compatible, low-drag route
Choose the feeding arrangement before the spool. eSUN TPU 95A is a practical candidate for shaped flexible parts on a supported route. It is a poor shortcut for a system that already shears soft filament and offers no approved adjustment.
Should I keep changing temperature when the filament is being chewed?
Check the mechanical feeding problem first using the printer's guidance. Temperature tuning cannot by itself establish that the extruder pressure and route suit this material.
Frequently Asked Questions
Does changing a cardboard spool prove AMS compatibility?
No. The feeder must support this flexible material independently of the reel’s shape or construction.
Do out-of-bag successes mean drying never matters?
No. Other successful accounts included drying, and eSUN gives preparation guidance. Arrival and storage conditions differ.
Technical Specifications
| Product type | Flexible TPU filament |
|---|---|
| Formulation | eSUN TPU-95A |
| Nominal Shore hardness | 95A |
| Filament diameter | 1.75 mm |
| Reviewed package | Black 1 kg; other colors qualified separately |
| Manufacturer nozzle guidance | 220–250°C |
| Manufacturer bed guidance | 45–60°C |
| Feeding compatibility | Manufacturer recommends direct drive; verify exact automated feeder support |
| Drying and storage | Manufacturer page gives 55°C >4h general preparation and 60°C >8h after extended storage; follow roll limits |
SUNLU TPU 90A
PolyFlex TPU90
PolyFlex TPU95
ELEGOO TPU 95A