Layer & BenchMATERIALS. TOOLS. BETTER PRINTS. Compare products

Best ASA filament for enclosed printing and outdoor projects

Four ASA candidates, with attention to color, warping and the setup that makes the roll usable.

Conceptual illustration for Best ASA filament for enclosed printing and outdoor projects
Find your fit

Your shortlist

Select a product to explore its fit and specifications.

Product

Polymaker ASA

Weather-exposed parts
Check current price · Amazon View details
Product

eSUN ASA+

Color-specific ASA trial
Check current price · Amazon View details
Product

Prusament ASA

Known ASA profile
Check current price · Amazon View details
Product

OVERTURE ASA

Enclosed black ASA
Check current price · Amazon View details

ASA is worth considering when weather exposure matters and the printer environment can support it. The purchase becomes less convincing if you are hoping the brand will remove large-part warping, drying needs or ventilation requirements.

Shortlist by the constraint you can control

Priority Candidate to investigate Why the decision can change
Existing outdoor-parts workflow Polymaker ASA Color variation, winding and footprint adhesion still need checks
Known profile and selected appearance Prusament ASA Limited matched feedback; Natural offer is 800 g
ASA+ color choice eSUN ASA+ Warping outcomes vary by color and setup
Enclosed black-part workflow OVERTURE ASA Check color uniformity and the actual part geometry

A small success is not a large-panel qualification

For a broad panel, test its footprint and corners rather than only a small cube. For mating components, qualify dimensions after cooling. For visible pieces, print a color sample before changing rolls halfway through. These checks answer different questions; a smooth wall does not prove outdoor load capacity.

If your printer setup is not yet settled, compare PETG and ASA for outdoor parts first. If weather exposure drives the purchase, the outdoor-use shortlist separates exposed and sheltered applications.

ProductWeather-exposed parts
Product image: Polymaker ASA
Product image

Polymaker ASA

Polymaker ASA is a useful candidate for an enclosed outdoor-parts workflow, supported by successful exterior objects and clean printing. Warping, winding and color changes remain real counterpoints. A successful outdoor object does not establish a structural rating or a service life for a different geometry.

Key features

  • Reviewed formulation: Polymaker ASA, formerly PolyLite ASA; standard colors; not Fiberon ASA-CF or Galaxy effect grades
  • Nominal filament diameter: 1.75 mm for selected offer
  • Package format: Selected Black #17161a, 1 kg spool; package and color verified separately

Best if

  • You have an ASA-ready enclosed setup and need a weather-oriented formulation.

Skip if

  • You need an exact match between separate black rolls.
  • You cannot qualify large footprints for lifting before the final print.
SpecificationsProduct details
Product typeASA filament
Reviewed formulationPolymaker ASA, formerly PolyLite ASA; standard colors; not Fiberon ASA-CF or Galaxy effect grades
Nominal filament diameter1.75 mm for selected offer
Manufacturer diameter toleranceNot verified — no exact-variant tolerance adopted in this review
Package formatSelected Black #17161a, 1 kg spool; package and color verified separately
Nozzle guidanceCurrent manufacturer wiki: 230–260°C; use a supported printer profile
Material careCurrent wiki: 70°C for 7 h; older instructions differ, confirm supplied-roll guidance
Variant / handling limitBlack and Jet Black are distinct; spool-edge redesign means historical feeder complaints may not describe current construction
Build plate guidanceCurrent wiki parameter table: 75–95°C; plate and printer guidance still apply
Printing environmentEnclosed printing recommended; manufacturer calls for ventilation and filtration
Service limitsIntended for weather-exposed use; no finished-part load rating or service-life guarantee established
ProductColor-specific ASA trial
Product image: eSUN ASA+
Product image

eSUN ASA+

eSUN ASA+ can produce clean-looking parts, but warping experiences vary sharply by setup and color. It is a candidate when you are prepared to qualify the exact roll, not an easy-mode alternative that removes enclosure and first-layer work.

Key features

  • Reviewed formulation: eSUN ASA+; black
  • Nominal filament diameter: 1.75 mm
  • Package format: 1 kg spool

Best if

  • You want an ASA+ color and can test the largest relevant footprint before committing.

Skip if

  • You are choosing ASA+ because you expect it to eliminate warping.
  • You need identical behavior across colors without retuning.
SpecificationsProduct details
Product typeASA filament
Reviewed formulationeSUN ASA+; black
Nominal filament diameter1.75 mm
Manufacturer diameter toleranceNot verified for the selected offer
Package format1 kg spool
Nozzle guidanceCurrent manufacturer page: 250–280 °C; bed 90–110 °C
Material careEnclosed-chamber printing recommended; current page gives no drying cycle
Variant / handling limitCold White and Grey accounts do not establish exact-black behavior
Build plate guidanceUse the bed guidance above and the supplied material-and-plate instructions
Printing environmentUse an enclosed setup suitable for the supplied ABS/ASA formulation and follow its ventilation instructions
Service limitsCustomer printing experiences do not establish a rated service temperature, structural qualification or outdoor lifetime
ProductKnown ASA profile
Product image: Prusament ASA
Product image

Prusament ASA

Prusament ASA is worth considering within an established Prusa-style material workflow. Natural-color consistency and good orange printing experiences are encouraging, but the small matched evidence set is not an outdoor endurance test. Check the actual package weight and color before comparing offers.

Key features

  • Reviewed formulation: Prusament ASA
  • Nominal filament diameter: 1.75 mm; manufacturer tolerance ±0.04 mm
  • Package format: Natural 800 g

Best if

  • You already have a suitable ASA profile and want the selected Natural or Orange appearance.

Skip if

  • You need proof of a finished part’s long-term outdoor strength from these printing reports.
SpecificationsProduct details
Product typeASA filament
Reviewed formulationPrusament ASA
Nominal filament diameter1.75 mm; manufacturer tolerance ±0.04 mm
Manufacturer diameter toleranceNot verified for the selected offer
Package formatNatural 800 g
Nozzle guidance260±10°C in linked TDS; material page says 260±5°C. Follow matched profile.; bed: 110±5°C
Material careExact drying cycle not verified here; follow current spool guidance
Variant / handling limitControl drafts/warping; suitable ventilation for ASA
Build plate guidance110±5°C
Printing environmentControl drafts/warping; suitable ventilation for ASA
Service limitsCustomer printing experiences do not establish a rated service temperature, structural qualification or outdoor lifetime
ProductEnclosed black ASA
Product image: OVERTURE ASA
Product image

OVERTURE ASA

OVERTURE ASA has useful black-printing reports and examples of outdoor or warm-location use. Those examples support consideration, not a certified temperature limit. Color striping and the need to establish plate adhesion still matter for visible or large parts.

Key features

  • Reviewed formulation: OVERTURE ASA
  • Nominal filament diameter: 1.75 mm; manufacturer tolerance ±0.02 mm
  • Package format: Black 1 kg

Best if

  • You have an enclosed ASA workflow and can qualify black surface appearance and part fit.

Skip if

  • Uniform cosmetic color across a large panel is essential without a trial.
  • You need a proven load-bearing or heat-rated component.
SpecificationsProduct details
Product typeASA filament
Reviewed formulationOVERTURE ASA
Nominal filament diameter1.75 mm; manufacturer tolerance ±0.02 mm
Manufacturer diameter toleranceNot verified for the selected offer
Package formatBlack 1 kg
Nozzle guidance240–270°C; bed: 70–95°C; customer 110°C anecdotes are not substituted
Material care75°C for 7h per manufacturer; avoid excessive drying and respect spool limits
Variant / handling limitEnclosed printer required; appropriate ventilation
Build plate guidance70–95°C; customer 110°C anecdotes are not substituted
Printing environmentEnclosed printer required; appropriate ventilation
Service limitsCustomer printing experiences do not establish a rated service temperature, structural qualification or outdoor lifetime

Product Comparison

Feature Polymaker ASA eSUN ASA+ Prusament ASA OVERTURE ASA
Product Image
Polymaker ASA
eSUN ASA+
Prusament ASA
OVERTURE ASA
Category ABS & ASA Filaments ABS & ASA Filaments ABS & ASA Filaments ABS & ASA Filaments
Product type ASA filament ASA filament ASA filament ASA filament
Reviewed formulation Polymaker ASA, formerly PolyLite ASA; standard colors; not Fiberon ASA-CF or Galaxy effect grades eSUN ASA+; black Prusament ASA OVERTURE ASA
Nominal filament diameter 1.75 mm for selected offer 1.75 mm 1.75 mm; manufacturer tolerance ±0.04 mm 1.75 mm; manufacturer tolerance ±0.02 mm
Manufacturer diameter tolerance Not verified — no exact-variant tolerance adopted in this review Not verified for the selected offer Not verified for the selected offer Not verified for the selected offer
Variant / handling limit Black and Jet Black are distinct; spool-edge redesign means historical feeder complaints may not describe current construction Cold White and Grey accounts do not establish exact-black behavior Control drafts/warping; suitable ventilation for ASA Enclosed printer required; appropriate ventilation
Service limits Intended for weather-exposed use; no finished-part load rating or service-life guarantee established Customer printing experiences do not establish a rated service temperature, structural qualification or outdoor lifetime Customer printing experiences do not establish a rated service temperature, structural qualification or outdoor lifetime Customer printing experiences do not establish a rated service temperature, structural qualification or outdoor lifetime
Package format Selected Black #17161a, 1 kg spool; package and color verified separately 1 kg spool Natural 800 g Black 1 kg
Nozzle guidance Current manufacturer wiki: 230–260°C; use a supported printer profile Current manufacturer page: 250–280 °C; bed 90–110 °C 260±10°C in linked TDS; material page says 260±5°C. Follow matched profile.; bed: 110±5°C 240–270°C; bed: 70–95°C; customer 110°C anecdotes are not substituted
Build plate guidance Current wiki parameter table: 75–95°C; plate and printer guidance still apply Use the bed guidance above and the supplied material-and-plate instructions 110±5°C 70–95°C; customer 110°C anecdotes are not substituted
Printing environment Enclosed printing recommended; manufacturer calls for ventilation and filtration Use an enclosed setup suitable for the supplied ABS/ASA formulation and follow its ventilation instructions Control drafts/warping; suitable ventilation for ASA Enclosed printer required; appropriate ventilation
Material care Current wiki: 70°C for 7 h; older instructions differ, confirm supplied-roll guidance Enclosed-chamber printing recommended; current page gives no drying cycle Exact drying cycle not verified here; follow current spool guidance 75°C for 7h per manufacturer; avoid excessive drying and respect spool limits
Details / retailer Check current price · Amazon Check current price · Amazon Check current price · Amazon Check current price · Amazon

Choose an ASA you can qualify in the intended environment

Make the first purchase a qualified roll, not an untested palette.

  1. Polymaker is a useful starting candidate for established enclosed ASA printing, with a deliberate color and winding check.
  2. Prusament, eSUN ASA+ and OVERTURE remain conditional alternatives for their selected profile or appearance.
  3. If the environment cannot support ASA, solve that constraint or reconsider the material before buying a bundle.
What would stop this purchase?

An unsuitable printing environment or an unresolved service requirement. Solve that first rather than hoping a different brand will compensate.

Frequently Asked Questions

Does a lower package price mean cheaper ASA?

Compare material mass as well as price. The selected Prusament Natural offer is 800 g, so comparing its package price directly with a 1 kg offer gives a misleading cost comparison.

What should I ask before buying ASA for matching enclosure panels?

Ask for the exact color and formulation, then qualify a small visible panel. Keep a reference sample and order enough of the confirmed material for the project where practical; a listing photo is not a color-match guarantee.

Should I choose the roll with the most positive outdoor reviews?

Use those reports to identify useful applications and problems to investigate. They do not share your exposure, part geometry or operating conditions, so their count cannot establish the longest outdoor life.

×